Canon LaserBase MF6530 MF Drivers 9xME 1.0 Publisher's description:

Do not connect the device to the PC until the driver installation is complete.If the MF Drivers have been previously installed on the PC, unistall them first using the shortcut on the Start>Programs>Canon>MF Drivers menu. After downloading th

Features:

Compliance
• Compliant with Serial ATA AHCI (Advanced Host Controller Interface) Spec. Reversion 1.0
• Compliant with Bus Master Programming interface for IDE ATA Controllers Revision 1.0
• Compliant with PCI Express Base Spec. Revision 1.0a
• Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 1.0a
• Compliant with Serial ATA II: Extensions to Serial ATA 1.0a Revision 1.1
• Compliant with Gen1m and Gen2m Serial ATA II: Electrical Spec. Revision 1.0


Overall
• Integrated 1-Lane PCI Express PHY and 2-port SATA II PHY
• Integrated two PLL for both PCI Express bus and SATA II interface
• Output swing control and Automatic impedance calibration for both PCI Express and SATA II PHY
• Supports up to 64K Byte external Flash for BIOS expansion
• Supports a slave SMBus interface (follow System Management Bus Specification Revision 1.1)
• Fabricated 0.18um/3.3V UMC CMOS Standard Logic Process with 1.8V and 3.3V
• Available in 128-pin LQFP package
• Pin compatible with JMB365 (1-port SATA II & 2-port PATA Host Controller)


PCI Express
• Supports 1-Lane 2.5Gbps PCI Express bus
• Internal native interface multiplexed to 2-port SATA II and 2-port PATA
• All registers accessible in unified memory space

SATA II
• Supports 2-port 3.0Gbps SATA II interface
• Supports two independent SATA II channels (separate logic and FIFO)
• Supports Native Command Queue (NCQ) on SATA II port
• Supports Hot Plugging like USB on SATA II port
• Supports SATA II Gen1m and Gen2m (External SATA Connection, eSATA)
• Supports Port Multiplier with Command-based Switching on SATA II port
• Supports up to UDMA6 transfer mode of PATA
• Supports up to 6 storage device connection
• Supports up to 0,1,0+1,JBOD RAID function

We suggest you to use the most newest driver version.


Before install this driver we recommend to set a restore point. This way you can reverse system if the driver is rong.

Download